Valvesonly are trusted Ball Valve Manufacturers in USA. A ball valve is a type of valve that controls the flow of a fluid by using a spherical ball with a hole in it. When the valve is open, the hole in the ball is aligned with the direction of flow, allowing the fluid to pass through. When the valve is closed, the ball is rotated so that the hole is perpendicular to the direction of flow, blocking the flow of the fluid. This simple design makes ball valves easy to operate and reliable for controlling the flow of fluids in various applications.

How does Ball Valve work?
To operate a ball valve, you typically turn a handle or lever attached to the ball. When the handle is parallel to the pipe, the valve is open, and the fluid can flow freely. To close the valve, you turn the handle perpendicular to the pipe, which rotates the ball to block the flow. Ball valves are commonly used in plumbing systems, industrial applications, and in the oil and gas industry because they are durable, easy to operate, and provide tight shut-off when closed. They are also available in a variety of sizes and materials to suit different needs and environments. 

Can ball valve be used for throttling?
While ball valves are primarily designed for on/off control rather than throttling, they can be used for throttling applications under certain conditions. However, there are some limitations and considerations to keep in mind:
•    Ball valves are not as precise in throttling as other valve types like globe valves. Their design, with a spherical ball that rotates within the valve body, makes them better suited for full-flow or shut-off applications rather than partial flow control.
•    Throttling a ball valve at low flow rates can cause accelerated wear and tear on the valve internals, leading to premature failure. The design of the ball and the sealing surfaces may not withstand prolonged operation in partially open positions.
•    Throttling a ball valve can lead to cavitation and erosion issues, especially in high-pressure or high-velocity applications. Cavitation occurs when pressure drops below the vapor pressure of the fluid, leading to the formation of vapor bubbles that collapse violently, causing damage to the valve internals.
•    Ball valves may exhibit poor control stability when used for throttling, particularly at low flow rates. This can result in hunting (rapid oscillations around the setpoint) or poor response to changes in flow conditions.
While ball valves can technically be used for throttling in some applications, it's generally recommended to use valves specifically designed for this purpose, such as globe valves or control valves. These valves offer better control accuracy, stability, and longevity when used in throttling applications.

When Ball Valve is used?
•    Ball valves are used in a wide range of industries and applications due to their versatility, reliability, and ease of operation. Some common uses of ball valves include:
•    Ball valves excel in applications where quick and reliable shut-off is required. They are commonly used to start or stop flow in pipelines, tanks, and process equipment.
•    Ball valves are suitable for high-pressure systems. Their robust design and ability to withstand high pressures make them a preferred choice in such applications.
•    While ball valves are known for their high-pressure capabilities, they are also used in low-pressure systems where tight shut-off is required. This includes applications in water distribution, irrigation, and plumbing systems.
•    Ball valves are available in a variety of materials which makes them suitable for use in corrosive environments. They are commonly used applications where resistance to corrosion is essential.
•    Ball valves can handle high temperatures, making them suitable for use in applications involving hot fluids or steam. They are often found in steam lines, boiler systems, and thermal power plants.
•    Ball valves are widely used as general-purpose valves in various industries and applications due to their simplicity, reliability, and cost-effectiveness. They are found in everything from residential plumbing systems to industrial process pipelines.

Types:
•    Two- piece ball valve 
•    Double Block and Bleed Ball Valve
•    Heavy Duty Investment Casting Ball Valve
•    Investment Casting Ball Valve
•    Forged Steel Ball Valve
•    Jacketed Ball Valve
•    Floating Ball Valve
•    Top Entry Ball Valve
•    Trunnion Ball Valve
•    Cast Steel and Cast Iron Ball Valve
•    Fully Welded Ball Valve
•    Three-piece ball valve  

Advantages:
•    They typically have a simple design and can be quickly opened or closed with a quarter turn of the handle.
•    When closed, they provide a tight seal, preventing leakage of fluids.
•    They can be used in a wide range of applications, including plumbing, industrial processes, and oil and gas production.
•    Due to their simple design, they require little maintenance and are less prone to failure compared to other types of valves.
•    The full bore design of ball valves allows for high flow rates and minimal pressure drop across the valve.
•    They can control flow in both directions, making them versatile for various piping configurations.
•    They can operate effectively in a wide range of temperatures and pressures, making them suitable for diverse environments.
•    These valves have a compact design, making them suitable for applications where space is limited.

As Ball Valve Manufacturers in USA, our ball valves offer a cost-effective solution for fluid control due to their reliability, longevity, and low maintenance requirements. 

Industries:
•    Oil and Gas
•    Petrochemical
•    Chemical Processing
•    Water and Wastewater Treatment
•    Power Generation
•    Pulp and Paper
•    Marine
•    Aerospace
•    Mining
•    Automotive

Description: 
•    Available materials: Cast iron, WCB, WCC, WC6, LCC, LCB, F55, F51, F53, Monel, SS304, SS316, CF8, CF8M, Ductile Iron, Titanium.
•    PN- PN10 to PN450
•    Class: 150-2500
•    Size: 1/2”- 48”.
•    Operations: Lever, pneumatic actuated, electric actuated and gear-operated 
•    Ends: Flanged, Buttweld, Socket weld, Threaded

Our Website: https://valvesonly.com/product-category/ball-valve/

Our Address: 80, Broad Street, Manhattan, New York, 10004